Designed for ease of installation and a negative detail that is second to none.
Alement Plus is available in a range of heights from 12mm to 80mm which can be mixed in use. For example you can have a 25mm on the floor and a 12mm on the vertical or use the 80mm on the floor and insert a timber skirting over the top to lift the position of the negative.
Auckland University were commissioned to do a STC test for us and a STC of 45 was achieved using a 64mm steel stud.
All sections are available in 5.6m lengths that will stay straight and true, in most cases you wont have the need for any joins.
The sections range covers from 64mm steel stud with one layer of 13mm plasterboard to 92mm steel stud with 3 layers of plasterboard.
There is a full range of matching one sided beads also.
Our keep stock of premium Niche anodised or we can have them powder coated to a colour of your choice.
Alement Plus is an extruded aluminium section that contains at least 80% recycled aluminium content.
Scope of Use
Designed specifically for interior use in commercial and domestic construction. The sections generally do not have any length or height restrictions.
All sections are to be used with 13mm plaster board, stopped according to stopping compound instructions. Note if the sections are powder coated we recommend removing the powder from the stopping bead and adding a bonding agent to the compound